Advertisement

5 Steps That Will Make Your Tile And Grout Shine Like New

25 February 2021

We are known for our 5-step reconstruction process, and today I'm going to explain to you five individual steps. But first, we need some tools, chemicals, cleaners, and vendors to get started.

That's what our supply list looks like.

  • Straight razor
  • Grout removal tool
  • Shop week
  • Treatment of mold/bacteria
  • Tile cleaner
  • Cleaning brush
  • Small fans
  • Growth
  • Small mixing bucket
  • Bucket of water
  • Grout float
  • Margin Trowel
  • Grout enrichment
  • Sponge
  • Tile seller
  • Lund Gun
  • Silicone
  • Old towel

I know, I know, it sounds like a lot of things, right? This is fine if you are not in the tile business, but many homeowners already have some of them lying around the house or garage.

Now that we have the equipment, we are ready to start with the 5 step group process. Wait, double-check your list, because when you start grout cleaning, it's hard to stop when you find the right equipment to finish the project.


tile and grout cleaning

 

First Step

Remove the old grout, sheet, and silicone. Using your straight razor, you will remove the old grout from the corners, outside the tub, toilet, and any other area where you will mess up again. Using your grout removal tool, remove the old grout from the grout joints.

Second Step

The second step of the regrowth process will be the treatment of mold/bacteria. Spray the mold/bacteria treatment well in which you will be dusted again. Let it sit for about 20-15 minutes before moving on to the next step.

Third Step

The third step in the re-grouting process is to wash the tiles. Spray the cleaner on the tile, and then let it sit for another 15-20 minutes. Clear, neat, neat, neat, neat, neat, neat, neat, neat, mostly neat, and neat.


tile and grout cleaning

 

Fourth Step

We will apply new gout again during the fourth phase of the group process. Mix the grout with "Lukewarm" water and your grout enhancer. Once your graft is permanent, start using gravel using your grout float in the optional direction across the tile. Once you walk around the area, wash the grout joints using your sponge and cold water for tile and grout cleaning.

Fifth Step

Now you are ready for the fifth stage of resuming the fifth stage. Seal all resettlement areas. Using your sponge, apply the sealer to all areas where you sweep again. Allow the sealer to dry for about 2-4 hours before buffing the tile with a dry towel.

Pictures

Advertisement
Blog archive
Advertisement
Advertisement